Home » Products » K series reducer » K series gear reduction K37-K187 four series horizontal hard tooth surface right Angle shaft reduction motor

K series gear reduction K37-K187 four series horizontal hard tooth surface right Angle shaft reduction motor

Availability:

Quantity:



Inquire Add to Basket

▶ Product Introduction

K series reducer is widely used in a variety of low speed, large torque right Angle drive, is the general basis of mechanical transmission. It realizes the speed conversion between the drive shaft and the driven shaft through the gear transmission, which is mainly composed of several main components such as the housing, input shaft, output shaft and gear. In addition, the K series reducer is designed on the basis of the modular system, with high double torque efficiency and long life gear, with footing mounting, flange mounting and shaft mounting types, suitable for various industrial production.

▶ Product Advantage

1.K spiral bevel gear reducer combined with international technical requirements, with high scientific and technological content.

2. space saving, reliable and durable, high overload capacity, power up to 200KW or more.

3.low energy consumption, superior performance, speed motor efficiency up to 95% or more.

4. low vibration, low noise, high energy saving.

5.the selection of high-quality steel material, steel cast iron box, gear surface through high-frequency heat treatment.

6. After precision machining, the reducer that constitutes the helical gear, bevel gear and bevel gear transmission assembly is configured with various types of motors, forming mechatronics and fully ensuring the quality characteristics of product use.

Q1:What is K Series Gear Reducer？

A1:K series reducer is a common mechanical transmission device, with high precision, high efficiency, fine transmission ratio classification, wide range, large transmission torque, reliable performance, low noise, flexible installation, easy to use and maintenance ‌.

Q2: How to choose the right K Series Gear Reducer?

A2: By understanding the characteristics of the reducer, determine the transmission ratio and output speed, determine the input power and torque, select the reducer model number and specifications, consider the installation method and output form, consider the working environment and conditions, check and check and choose reliable suppliers and brands and other steps, we can choose the most suitable K series reducer. Provide a strong guarantee for the normal operation of the equipment.

Q3:How to better maintain K series reducer?

A3:1. Regular inspection: Regularly check the appearance and operating status of the reducer, and pay attention to any abnormal noise, vibration or leakage. Check the condition of oil seals and bearings to ensure there is no damage or wear.

2. Inspection and replacement of lubricating oil: check the color and smell of lubricating oil regularly to ensure that it is not deteriorated or contaminated. Change the lubricating oil according to the manufacturer's recommended cycle and ensure that the oil level is in the correct range.

3. Clean the reducer: remove the dust and dirt on the surface of the reducer and maintain good ventilation. If there is dust or foreign matter inside the reducer, it can be cleaned with appropriate cleaners and tools.

4. Check the cooling system: If the reducer is equipped with a cooling system, check the level and quality of the coolant. Ensure that the cooling system is not blocked or damaged and maintains a good cooling effect.

5. Check the electrical system: check the electrical connection and junction box of the reducer to ensure that it is not damaged or loose. Check the power supply voltage and current with appropriate testing instruments to ensure that the electrical system is working properly.

6. Monitoring of load and operating conditions: ensure that the reducer operates under the designed and specified load. Monitor operating conditions such as temperature, vibration and noise to ensure the reducer is working at its best.

Q4: Can you OEM production?

A4: Yes, we can customize production according to drawings.